Product Description
Timing Belt Tensor 06A109479C 06A109479A 06A109479F 06A109479 for VW Audi
Item specifics:
Brand: |
YIBAI |
Manufacturer Part NO.: |
0151HD6001 |
Delivery Time: |
30 Days |
Warranty: |
1 Year or 50000 KM |
Port Of Shipment |
HangZhou Or ZheJiang Port, China |
Package: |
Neutral box, Customized box |
Reference Model: |
Audi Seat Skoda VW |
Reference OEM: |
06A109479C 06A109479A 06A109479F 06A109479 V55443 T43571 531571320 VKM11113 |
Application;
Model |
Engine |
Displacement |
Power |
Hp |
Type |
Year |
AUDI A3 (8L1) |
(1996/09 - 2003/05) |
|||||
AUDI A3 (8P1) |
(2003/05 - /) |
|||||
AUDI A3 Convertible |
(2008/04 - /) |
|||||
AUDI A3 Sportback (8PA) |
(2004/09 - /) |
|||||
AUDI A4 (8D2, B5) |
(1994/11 - 2000/11) |
|||||
AUDI A4 (8E2, B6) |
(2000/11 - 2004/12) |
|||||
AUDI A4 (8EC, B7) |
(2004/11 - 2008/06) |
|||||
AUDI A4 Avant (8D5, B5) |
(1994/11 - 2001/09) |
|||||
AUDI A4 Avant (8E5, B6) |
(2001/04 - 2004/12) |
|||||
AUDI A4 Avant (8ED, B7) |
(2004/11 - 2008/06) |
|||||
SEAT ALHAMBRA (7V8, 7V9) |
(1996/04 - 2571/03) |
|||||
SEAT ALTEA (5P1) |
(2004/03 - /) |
|||||
SEAT ALTEA XL (5P5, 5P8) |
(2006/10 - /) |
|||||
SEAT CORDOBA (6K2) |
(1999/06 - 2002/10) |
|||||
SEAT CORDOBA (6L2) |
(2002/09 - 2009/11) |
|||||
SEAT CORDOBA Vario (6K5) |
(1999/06 - 2002/12) |
|||||
SEAT EXEO (3R2) |
(2008/12 - /) |
|||||
SEAT EXEO ST (3R5) |
(2009/06 - /) |
|||||
SEAT IBIZA III (6K1) |
(1999/08 - 2002/02) |
|||||
SEAT IBIZA IV (6L1) |
(2002/02 - 2009/11) |
|||||
SEAT IBIZA V (6J5) |
(2008/03 - /) |
|||||
SEAT IBIZA V SPORTCOUPE (6J1) |
(2008/07 - /) |
|||||
SEAT CZPT (1M1) |
(1999/11 - 2006/06) |
|||||
SEAT CZPT (1P1) |
(2005/05 - /) |
|||||
SEAT TOLEDO II (1M2) |
(1999/04 - 2006/05) |
|||||
SEAT TOLEDO III (5P2) |
(2004/04 - 2009/05) |
|||||
SKODA FABIA (6Y2) |
(1999/08 - 2008/03) |
|||||
SKODA FABIA Combi (6Y5) |
(2000/04 - 2007/12) |
|||||
SKODA FABIA Saloon (6Y3) |
(1999/10 - 2007/12) |
|||||
SKODA OCTAVIA (1U2) |
(1996/09 - 2571/12) |
|||||
SKODA OCTAVIA (1Z3) |
(2004/02 - /) |
|||||
SKODA OCTAVIA Combi (1U5) |
(1998/07 - 2571/12) |
|||||
SKODA OCTAVIA Combi (1Z5) |
(2004/02 - /) |
|||||
SKODA SUPERB (3U4) |
(2002/02 - 2008/03) |
|||||
VW BORA (1J2) |
(1998/10 - 2005/09) |
|||||
VW BORA Estate (1J6) |
(1999/05 - 2005/05) |
|||||
VW CADDY III Box (2KA, 2KH, 2CA, 2CH) |
(2004/03 - /) |
|||||
VW CADDY III Estate (2KB, 2KJ, 2CB, 2CJ) |
(2004/03 - /) |
|||||
VW GOLF IV (1J1) |
(1997/08 - 2005/06) |
|||||
VW GOLF IV Variant (1J5) |
(1999/05 - 2006/06) |
|||||
VW GOLF PLUS (5M1, 521) |
(2005/01 - /) |
|||||
VW GOLF V (1K1) |
(2003/10 - 2009/02) |
|||||
VW GOLF V Variant (1K5) |
(2007/06 - /) |
|||||
VW GOLF VI (5K1) |
(2008/10 - /) |
|||||
VW GOLF VI Variant (AJ5) |
(2009/07 - /) |
|||||
VW JETTA III (1K2) |
(2005/08 - 2571/10) |
|||||
VW JETTA IV (162) |
(2571/04 - /) |
|||||
VW MULTIVAN V (7HM, 7HN, 7HF, 7EF, 7EM, 7EN) |
(2003/04 - /) |
|||||
VW NEW BEETLE (9C1, 1C1) |
(1998/01 - /) |
|||||
VW NEW BEETLE Convertible (1Y7) |
(2002/09 - 2571/10) |
|||||
VW PASSAT (3B2) |
(1996/08 - 2000/11) |
|||||
VW PASSAT (3B3) |
(2000/11 - 2005/05) |
|||||
VW PASSAT (3C2) |
(2005/03 - /) |
|||||
VW PASSAT Variant (3B5) |
(1997/05 - 2000/11) |
|||||
VW PASSAT Variant (3B6) |
(2000/11 - 2005/08) |
|||||
VW PASSAT Variant (3C5) |
(2005/08 - /) |
|||||
VW POLO CLASSIC (6KV2) |
(1995/11 - 2002/07) |
|||||
VW POLO Variant (6KV5) |
(1997/04 - 2001/09) |
|||||
VW SHARAN (7M8, 7M9, 7M6) |
(1995/05 - 2571/03) |
|||||
VW TOURAN (1T1, 1T2, 1T3) |
(2003/02 - /) |
|||||
VW TRANSPORTER / CARAVELLE Mk V Bus (7HB, 7HJ, 7EB, 7EJ, 7EF) |
(2003/04 - /) |
|||||
VW TRANSPORTER Mk V Platform/Chassis (7JD, 7JE, 7JL, 7JY, 7JZ, |
(2003/04 - /) |
|||||
VW TRANSPORTER V Box (7HA, 7HH, 7EA, 7EH) |
(2003/04 - /) |
Company Profile
HangZhou CZPT Auto Parts Industry Co., Ltd is a family owned company, established in 2005.
As a real, direct and professional manufacture in China, CZPT has grown to become 1 of greatest manfacturer and exporter in Performance parts, include intake system, exhaust system, cooling system, interior&exterior parts etc.
We own a factory located in HangZhou, HangZhou, which has 8000 square meter, tens of machine, 150 workers, 15 person sales tean, 5 R&D department. Our customers cover North American, South American, Asia, Middle east and Europe. We export the millions of USD per year. Looking forward to have a nice cooperation with you.
Why Choose YiBai?
It's simple. The YiBai Company is built on delivering more Quality, Reliability, and Value than any other manufacturer. Whether supplying the world's automakers with reliable OE parts, or developing aftermarket replacement parts at or above spec, YiBai's line of products are built to deliver superior all-around performance every day.
Aftermarket Parts Built At or Above Specification
The quality of YiBai parts is guaranteed because every component that leaves a YiBai factory has been designed with precision, manufactured to the strictest OE standards or above, and subjected to rigorous safety and performance tests. In the end, it all comes down to quality - that's what the YiBai name stands for.
Measure Everything for a First Time Fit
Our First Time Fit philosophy attracts attention throughout the automotive world, while our commitment to pushing technology into the future and continually sets us apart around the globe.First Time Fit is a promise that YiBai makes to the aftermarket, by providing products that are OE grade or better - and fits the first time.
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of delivery?
A: EXW, FOB CIF, DDU.
Q3. How about your delivery time?
A: Generally, it will take 15 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q4. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
What to Look for in a Belt Tensioner
If you notice the power steering, air conditioning, or power steering stops working, chances are that your belt tensioner has been compromised. A compromised belt tensioner can be completely destroyed overnight, or it can last for a long time before it breaks. Either way, you should never drive with a faulty belt tensioner. It's far better to have it replaced before the engine shuts down completely. In addition, replacing a belt tensioner will prevent other complications, such as power steering or air conditioning, from occurring.
Misaligned idler pulley
If the tensioner arm is not rotating freely or has an abnormal chirping noise, it could be the result of a misaligned idler pulley. If this is the case, replace the idler. If the idler does not move, you may need to adjust the accessory mount points or use a laser alignment tool. The tensioner arm is only 1 part of the tensioner.
A misaligned idler pulley on a belt tensioner is usually the cause of a squeaking noise. If this noise continues even after a replacement of the belt, it's time to replace the whole belt. A misaligned idler pulley can also be the cause of premature belt wear. If the idler pulley is out of alignment, it could also cause the belt to wear too fast and lead to the premature failure of the timing belt.
The tensioner pulley is made of nylon, steel, or plastic. It may be flat or grooved. Before replacing it, check for any cracks, dents, or debris on the pulley's surface. Plastic pulleys may have broken sidewalls. If the idler pulley is worn out, you might also notice squealing noises when the vehicle is in motion.
The misalignment of a belt is most pronounced when the span between the 2 pulleys is short. When the span is long, however, diagnosing the problem becomes more complicated. Small degrees of offset may not be visible to the naked eye, but a laser alignment tool can help identify these subtle variations. In order to identify a misaligned idler pulley on a belt tensioner, you must first determine its cause.
When the tensioner's idler pulleys are out of line, a belt tensioner will not be able to properly adjust the torque that the belt is under. This may result in squealing noises. If this is the case, it is time to call a mechanic. He or she will be able to determine the cause and correct it. If you suspect the problem, your next step is to replace the idler pulley on the belt tensioner.
If the ribbed belt is not properly aligned, you may have a misaligned idler pulley. To fix the misalignment, locate the belt adjustment bolt underneath the hood. You should be careful not to damage the alternator or battery terminal while doing this task. If you do accidentally connect the battery positive to the earth, you might be able to damage the ribbed belt and ruin your vehicle's timing.
Besides a misaligned idler pulley on the belt tensioner, another problem may be the alternator's serpentine belt. If your car's alternator belt is not aligned properly, you could have misaligned the alternator's pulley or a worn-out bearing. Regardless of the cause of your problem, you should have the belt inspected.
Bad idler pulley
Having a Bad Idler Pulley on a Belt Tensioner? If this sounds familiar, then it's probably time to change it. Idler pulleys slowly take hits while the engine is running, causing the belt to wrap and bend. Eventually, the belt will slip, and a new idler pulley should be installed to ensure optimal tension. But before you spend a dime on a new one, let's talk about what to look for.
Symptoms of a Bad Idler Pulley: If the noise persists, there is a problem with the idler pulley or its bearing. These parts wear out over time and may eventually cause a cracked idler pulley or serpentine belt. Not only will the idler pulley create an irritating noise, but it will also damage the belt itself, leading to overheating, stalled engine, and even damage the head gaskets. Thankfully, a Bad Idler Pulley on a Belt Tensioner is easily replaced and will only cost about $40.
Although the Idler Pulley is not the most popular component on a car, it's a critical part that ensures that the engine runs smoothly. It's easy to overlook this part, but its failure can make it impossible for your vehicle to operate at its optimal level. Moreover, a Bad Idler Pulley on a Belt Tensioner will cause your engine to malfunction, so it's essential that you check it at regular intervals.
If you notice a squealing noise while driving, the Idler Pulley is likely the culprit. Because of friction between the engine belt and idler pulley, the engine belt rubs against the pulley, causing it to squeak and make a clicking noise. This squealing noise will continue until the problem is repaired or replaced. It's time to start addressing the problem before it becomes too late.
If you notice the tensioner pulley moving away from the engine, it's most likely that the pulley is malfunctioning. A belt that is loose or slack may make it difficult to start the car, or your engine may even overheat. If this occurs, it's crucial to replace the Idler Pulley as soon as possible, because a Bad Idler Pulley on a Belt Tensioner can seriously damage your vehicle.
The Idler Pulley facilitates the motion of the engine belt. It serves as a smooth rotating point that allows the belt to loop without a barrier. Over time, this part of the system will begin to show signs of wear and tear, and replacement is vital to protect your engine, serpentine belt, and other accessories. An early warning sign of a problem is a squealing sound coming from the engine area.
Broken tensioner arm
The belt tensioner is a piece of machinery that is used to keep the belt tight. If this part breaks, you can easily repair it yourself using a long-handled ratchet, serpentine belt tool, or a socket. To repair the tensioner, simply remove the drive belt from the pulley and rotate it to release tension. Check for roughness, resistance, or binding of the drive belt.
Noises caused by the tensioner are a sign of a damaged component or excessive oscillation. These noises are usually caused by worn internal components or the tensioner's pivot bushing. In some cases, the vibration damping system or a worn-out alternator pulley could also be to blame. If this is the case, replace the pulley and tensioner together. To check the condition of your belt tensioner, follow these steps.
In addition to worn-out springs, a loose or broken pivot arm could be causing your belt to misalign. A worn-out tensioner pulley bushing will also cause vibrations, noise, and seizing. Lastly, a broken tensioner spring could be preventing the belt from maintaining proper tension. Broken springs are also prone to loss of tension due to heat. Damaged tensioner housing can also affect belt tension.
Once the belt is installed, you need to check the condition of the pulley and the tensioner arm. Make sure that the pulley is moving and that the arm is moving smoothly with the cranking and releasing. If the arm is wobbling, the tensioner is failing. If the pulley wobbles or excessive chattering occurs, the tensioner is failing. It can also be seized or jammed.
If the tensioner arm has broken, replace it. Replacing the tensioner can be a tedious task. Be sure to use a suitable tool to tighten the pulley and tensioner. If you are not sure of how to replace the pulley, try using a serp belt tool. Another good option is to purchase a 3/8 drive ratchet. If you don't have this tool, you can use a long 3/8 extension and a deep socket.
The belt tensioner assembly can fall off the engine, causing damage to the timing belt. If you are replacing it, you must replace it with a new one, and tighten all of the mounting bolts before reinstalling it. To avoid further damage to the engine, ensure you replace the belt with a new tensioner and a new belt. The tensioner is bolted to the engine's timing cover, so make sure you carefully tighten the bolts when replacing it.