Product Description

Battery PP/PET Strapping Tool Battery Powred Strapping Hand Tool

Product Description

The OR-T200 is a new generation of battery powered hand strapping tool. Strapping has never been so easy. The 200 is suitable for PP and Pet strapping. Its features include one-piece strap insertion, 1 hand operation for tensioning and sealing

STRAP WIDTH	13-16 mm
STRAP THICKNESS	POLYPROPYLENE - 0.5 - 1.0 mm
WEIGHT	3.9 KG
SIZE	375 X W 130 X H 140 mm
TENSIONING	ELECTRICALLY (PUSH BUTTON) 400-2000N
SEALING	ELECTRICALLY (PUSH BUTTON) FRICTION WELD SEAL
BATTERY	100-200 STRAPPINGS WITH ONE BATTERY CHARGE
CE APPROVED	YES

The tool is light (3.9kg) and easy to use. Strap tension and sealing time can be adjusted at the touch of a button. The tool comes complete with a charger and 2 batteries. Incorporates the latest in strapping technology.

SAFETY NOTICE:
Xutianpack recommend the use of hand and eye protection when using all strapping tools

Polyester strapping is replacing traditional steel strapping because of the following benefits:

Health and Safety:
OR-T200 polyester strapping creates a safer working environment. It has no sharp edges and is therefore less likely to cut hands during handling, application or removal. Coil changes are less frequent and can be easily achieved by 1 person without the use of cumbersome lifting equipment.

Product Protection:
OR-T200 polyester strapping will not rust and stain packs when exposed to moisture and is UV resistant for over 2 years.

Disposal:
OR-T200 polyester strapping is easier for you customers to dispose of than steel, as it is more easily compressed in refuse skips and is fully recyclable.

Impact Resistance:
OR-T200 polyester strapping withstands shock force. For example: If a pallet is dropped during handling or in transit, it takes 2.5 times the energy to break as steel, for straps of comparable break strength. As polyester strapping has a combination of strength and elasticity, it ensures that your products will arrive at their destination in the same condition as they were shipped.

Elasticity:
OR-T200 polyester strapping has an 'elastic memory' and so maintains strap tension in the event of pack settlement or shrinkage by contracting with the pack. Steel straps often become loose if the pack configuration changes creating a potential hazard when handling.

Low Creep:
OR-T200 polyester strapping has 'low creep'; properties meaning that the strap tension will not 'relax'. Potentially hazardous loads such as brick void packs can therefore be moved safely even after extended period of storage and transport

Detailed Photos

Certifications

Company Profile

Xutian (Sunpack) was established in 1997 with the goal of providing the best strapping machine in the industry at competitive prices.
Xutian (Sunpack)is a group company with 3 branches located in HangZhou, HangZhou and HangZhou. We dedicate to end of line package development for years. We have more than 30 staff in our RND department . We carry banding machine, strapping machine, pallet wrapper, case sealer and manual strapping tool in our range.
Our goal is to make every customer completely satisfied with the best packaging machinery and services through continuous improvement and employee involvement.
We believe that innovation is key to our success. Through a firm commitment to research and development, we have earned a reputation for being at the forefront of packaging innovation. We provide our customers with advanced solutions that increase production efficiency, improve load integrity and reduce operating costs. Over the years, we've continuously refined our existing products and created new ones to take advantage of evolving technologies and to meet our customers' ever-changing needs.
We appreciate your interest in our company and will be in touch with you as soon as possible to discuss your specific needs

 

Exhibition

Our Service

1.Fast parts delivery
  Within 3 days to deliver required parts

2.Fast response
Within 24 hours to give email reply or calling-back and solve the claim

3.24 hours in hall service
Within 24 hours to arrive in cusotmer's location

4.Agent call-in help
Local agents could help for Emergency cases

5.OEM SERVICE
OEM design for all customers

How to Repair a Timing Belt Tensioner

Your timing belt tensioner is a critical component of your vehicle's drivetrain. Too little tension, for example, will cause the belt to slip, and too much tension can overload shaft bearings, leading to premature failure. If you notice that your belt tensioner is not working properly, you should immediately visit a mechanic. Corrosion from road splash, dirt, mud, or other debris can jam the tensioner housing. To avoid this, make sure that you replace your timing belt tensioner as soon as possible.

Symptoms of a bad belt tensioner

If you've ever wondered what signs indicate a bad belt tensioner, look no further than your vehicle's engine. Worn belts or a broken tensioner can cause an irritating squealing noise, as well as the belt to slip. Even worse, a bad tensioner can cause water to enter the belt and pulley, resulting in water damage. A worn tensioner is usually the culprit of the noise, but there are also other warning signs that a belt is in trouble.
Your vehicle's engine may start to run poorly or even squeal when you turn the key. Similarly, your engine may fail to start at all, or the check engine light may illuminate. The belt may also start to wear out in an unusual pattern. These signs indicate that the tensioner is in need of replacement. If you notice 1 or more of these signs, get your car checked right away.
To check the condition of the tensioner, remove the drive belt and observe the pulley. You may notice rust dripping or bleeding at the mounting bolts, which are the most common signs of a bad tensioner. If you can't remove the drive belt, check the pulley by rotating it. If you feel resistance, the pulley is likely worn or slack.
Failure of the belt tensioner will also cause other parts of the car to fail. If a bad belt tensioner isn't fixed quickly, you might not be able to use the vehicle properly. You could end up breaking your car's engine, losing power steering, and possibly even the water pump. If your car is not running right, you could be stuck in the middle of nowhere. Even if the alternator doesn't work, you'll still have a malfunctioning power steering system and a dead AC system.
A broken timing belt tensioner can cause strange noises or a no-start condition. These noises and symptoms are signs of a bad belt tensioner, and you'll have to replace it ASAP. If you don't know what symptoms mean, don't hesitate to take your car to a mechanic. You'll be surprised how easy it is to check this vital component and save yourself a bunch of money.

Components of a belt tensioner

The components of a belt tensioner assembly consist of 4 key components. The clearance between the pulley and the base is critical to the tensioner's operation. If the tensioner is installed incorrectly, the spring can break and cause severe injury. The spring's preload and powerful force make it difficult to service the unit safely. These parts are non-serviceable. If you are unsure of how to repair your tensioner, contact an authorized mechanic.
The components of a belt tensioner drive are shown in FIG. 2. The rotor shaft is connected to the drive screw, while the second transmission is connected to the gear shaft. The rotor and gear shaft are in parallel with each other. The gear shaft and worm wheel are connected to the belt tensioner drive. In other words, the belt tensioner drive is located in the B-pillar of the motor vehicle.
A belt tensioner may be equipped with a drive shaft and electric motor. The drive shaft may also contain a worm gear or worm wheel. The drive shaft also has an intermediate gearbox. Once the tensioner is set, it is ready to move to its safe-position position. It is a relatively simple and inexpensive replacement for your belt. When replacing a multi-ribbed belt, be sure to replace the tensioner along with the belt. Gates recommends replacing all wear parts at once.
In the event of a faulty drive belt tensioner, the belt will not stay taut. The pulley can wobble and cause the belt to fray. In addition to this, the bearings can cause a loud squealing noise. In this case, the accessory motors will continue to run, while the belt itself will not. Therefore, replacing the timing belt tensioner is an important part of maintaining the car.
In some systems, the belt tensioner uses a worm gear as the first gear. This results in rolling engagement of the screw's teeth. This reduces noise and vibrations, while maximizing the efficiency of the belt tensioner drive. Additionally, a worm gear can eliminate the need for additional parts in belt tensioners. While this may not be practical in all instances, it is a good choice for space-constrained environments.

Repair options for a timing belt tensioner

A timing belt tensioner is an essential part of an automobile's timing chain and is responsible for ensuring proper timing. Proper alignment of timing marks is essential to the proper operation of the engine, and improper alignment may lead to damage to the engine. To repair a timing belt tensioner, there are several repair options available. First, you need to remove the engine cover. You can then remove the timing belt tensioner by loosening the pulley using a ratchet or breaker bar.
When the timing belt isn't properly tensioned, the engine will misfire. The engine misfires when the valve opens and the pistons rise at the wrong time. When this happens, the timing belt cannot properly grip the gears and the engine will not function. If this part fails, you'll have to replace the whole timing chain. However, if you are handy with tools, you can easily replace the entire timing belt tensioner yourself.
If your timing belt tensioner is out of alignment, you should replace it. If you're not sure whether it needs to be replaced, check it with a professional and learn the details of the repair. The timing belt tensioner is the most critical part of the engine, so it's important to know about it. Otherwise, your car won't run as well as it could. Repair options for a timing belt tensioner will vary depending on the severity of the problem and how much damage it has done.
While there are several repair options for a timing belt tensioner, the average cost of replacement is $364 to $457, and this doesn't take into account any tax or fee you may be charged. DIY repair methods will usually cost you $50 to $150, and you'll likely save a lot of money in the process. However, you need to remember that you may be unable to do the job yourself because you don't know how to use the proper tools and equipment.
While it is not difficult to replace a timing belt tensioner on your own, you should know that you'll need to remove other parts of the engine as well as special tools to make the repair properly. This is an advanced repair job and requires a great deal of skill. If you're new to home car repair, you may not want to attempt it yourself. There are many other options, such as hiring a mechanic.

Installation instructions

While there are no universal installation instructions for belt tensioners, the manufacturer of your car may provide detailed instructions. Before attempting to replace your tensioner, read the manufacturer's recommended procedures carefully. To install a new tensioner properly, unload the old 1 and take a picture or sketch of how the belt should be routed. Once the old tensioner is out, follow the manufacturer's torque specifications. Make sure to unload and remove the belt from the tensioner, and follow the manufacturer's torque specifications to install the new one.
If your car comes with a manual belt tensioner, you can follow the instructions. The manual will have a corresponding guide for installation. When installing a belt tensioner, make sure the manual clearly states the static tension for your particular model. Check that it is in line with the engine relief to ensure proper belt tension. You can then use a 6mm allen key to turn the tensioner clockwise and counterclockwise. Once it is in position, release the tensioner to operate. The belt tensioner should now apply the proper tension to your belt.
Before installing a new belt tensioner, make sure you read the manual completely. You should follow these steps carefully to avoid any problems with the tensioner. If the tensioner has failed, you must replace it immediately. A new belt tensioner will help you ensure proper performance of your accessory belt drive system. If you are installing a new multi-ribbed belt, you should replace the tensioner as well. However, it is important to note that replacing the belt tensioner is a complicated process and requires a mechanic to be able to safely remove the belt from the engine.
To install a second stage drive belt, walk the belt onto the input drive and generator. Ensure that the belt is seated properly in the grooves of the pulleys. Next, replace the input drive belt and right and left Drive Disk covers. Test the machine to ensure that it is working properly. If it doesn't, replace the original drive belt. After installing the new belt, you may want to read the manual again to make sure it is in perfect condition.